Music & Rock Legend Guitar Skins

These designs turn a guitar or bass body into a tribute to music itself, with painted portraits of rock and reggae legends, spinning vinyl records, a skeleton band on stage and an astronaut at the turntables. Each skin comes as a 50×60 cm body sheet or a 27.5×33 cm pickguard sheet, laminated in high gloss and mostly printed to order.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order

Related themes: Paint Splatter & Drip · Space & Galaxy · Skulls & Dark Art · All guitar skins

Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Size guide: will it cover my body?

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Install guideClear coat without liftCustomer builds

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Tele pickguardStrat pickguardTL-style kit + skinTL-style body + skin

Other themes

Browse all our guitar skins, or another theme:

Skulls & Dark ArtAbstract & OpticalSurreal & DreamscapePattern & TextureForest & LandscapePsychedelic & TrippyFantasy & MythicalHorror & MonsterComic & CartoonVintage, Relic & RustFlower & BotanicalPin-Up & Pop ArtMovie & CinemaSpace & GalaxyBlack & WhitePaint Splatter & DripAnimal & WildlifeHalloweenMacro & Close-UpAnime & Manga StyleSmoke & InkFlame & FireOcean & WaveChristmas & WinterCyber & TechCamo & MilitaryChrome & MetallicAnimal PrintGraffiti & Street ArtFlagJapanese Art & TattooRetro GamingLightning & ElectricDiamond Plate & IndustrialHolographic & IridescentMarble & StoneQuilted & Flamed MapleWood Grain & BurlCarbon FiberGlitter & SparkleSnakeskin & ReptileCrackle & Cracked PaintTarot, Zodiac & MysticSteampunkLeather & Denim

Common questions

Where does a portrait design sit on my guitar body?

The face is usually centered on the lower bout, below the strings, so it stays visible around the pickups and bridge. On smaller or offset bodies, check the full artwork first, as the edges of the image are trimmed away when you cut around the outline.

Will the cut-outs for pickups and controls spoil the artwork?

Some of the image is lost wherever you cut for pickups, the bridge and control knobs, so busy designs like the record and splatter prints hide these gaps better than a single large portrait. If a face is the main feature, consider using the pickguard sheet for the guard and keeping the body sheet for the area below it.

How do I keep the printed design looking good?

The high-gloss laminate already protects the print, so no clear coat is needed. Wipe it with a soft, slightly damp cloth and avoid solvents or abrasive polishes, which can dull the gloss finish.