Flame & Fire Guitar Skins

Flame artwork wraps around the curves of a guitar body, so the fire seems to rise from the edges and spread across the top. Here you will find swirling infernos, molten swirls, glowing embers, a red flame wall and a fire and ice eclipse, printed on high-gloss laminated vinyl in full body and pickguard sizes.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order

Related themes: Pattern & Texture · All guitar skins

Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Size guide: will it cover my body?

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Install guideClear coat without liftCustomer builds

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Tele pickguardStrat pickguardTL-style kit + skinTL-style body + skin

Other themes

Browse all our guitar skins, or another theme:

Skulls & Dark ArtAbstract & OpticalSurreal & DreamscapePattern & TextureForest & LandscapePsychedelic & TrippyFantasy & MythicalHorror & MonsterComic & CartoonVintage, Relic & RustFlower & BotanicalPin-Up & Pop ArtMovie & CinemaSpace & GalaxyBlack & WhitePaint Splatter & DripAnimal & WildlifeHalloweenMacro & Close-UpAnime & Manga StyleSmoke & InkOcean & WaveChristmas & WinterMusic & Rock LegendCyber & TechCamo & MilitaryChrome & MetallicAnimal PrintGraffiti & Street ArtFlagJapanese Art & TattooRetro GamingLightning & ElectricDiamond Plate & IndustrialHolographic & IridescentMarble & StoneQuilted & Flamed MapleWood Grain & BurlCarbon FiberGlitter & SparkleSnakeskin & ReptileCrackle & Cracked PaintTarot, Zodiac & MysticSteampunkLeather & Denim

Common questions

How do the flames sit on different body shapes?

The 50×60 cm sheet covers a whole guitar or bass body, so you can position it so the flames rise from the lower bout or lick up around the horns. Swirling patterns are the most forgiving on offset or sharply cut shapes because there is no single direction to line up.

Will the colors look bright once applied?

Yes, the high-gloss laminate keeps the oranges, reds and yellows vivid and gives a finished shine without any clear coat. Darker designs such as the ember swirls show the most contrast on a black pickguard or hardware.

Can I use one of these designs just on the pickguard?

Yes, most designs come as a 27.5×33 cm pickguard sheet as well as the full body size. Some are in stock, while most are printed to order, so check the listing for dispatch times.