Collection: Crackle & Cracked Paint Guitar Skins

Crackle artwork gives a guitar body the look of aged, split paint or dried ground without any real finish damage, so a new instrument can carry a worn character from day one. This page offers designs such as cracked earth, cracked tree rings and faded, distressed Union Jack flags, printed on full body sheets or pickguard sheets.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order
Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Common questions

Will the crack pattern look right on a curved or contoured body?

The vinyl stretches slightly over gentle contours, and because crackle patterns are irregular, small shifts in the lines at edges and arm cuts are hard to spot. Deep carves and sharp horns may need relief cuts, which the random cracks help to hide.

Does the cracked effect feel textured to the touch?

No, the cracks are printed artwork under a smooth high-gloss laminate, so the surface is flat and shiny. The aged look is purely visual and needs no clear coat on top.

Which size should I order for a distressed flag design?

Choose the 50×60 cm sheet to cover a whole guitar or bass body so the flag stays in one piece, or the 27.5×33 cm sheet if you only want the pattern on a pickguard. Most designs are printed to order, so allow a little extra time unless the item is shown in stock.