Collection: Carbon Fiber Guitar Skins

A carbon weave print gives a guitar or bass body the technical, layered look of composite material without changing the wood underneath. Here you will find black and red carbon weave designs and a fine carbon twill, printed on high-gloss laminated vinyl in full body and pickguard sheet sizes.

  • Full body 50×60 cm or pickguard sheet
  • High-gloss laminated vinyl
  • No clear coat needed
  • In stock or printed to order
Sizes, fitting and questionsShow less

Two sizes, one design

The full body sheet (50×60 cm) covers the front and sides of any guitar or bass body in one piece. The pickguard sheet (27.5×33 cm) carries the whole design scaled down, ready to cut to a Tele or a Strat pickguard.

Fitting takes an afternoon

Sand, clean, lay the skin on, warm the curves with a hairdryer and trim the routes. No spraying, no booth.

Prefer it ready-made?

Every design here also comes UV printed on a copper-shielded pickguard, or in the box with a bound TL-style kit or body: the binding makes fitting the skin easy.

Common questions

Does the weave pattern line up around the curves of a body?

The printed weave runs in straight lines across the sheet, so it stretches slightly over tight curves such as cutaways and belly contours. Lining the weave up with the center line of the body before you press it down keeps the pattern looking straight from the front.

Will it look like real carbon fiber?

It is a flat print, so it does not have the depth or shifting sheen of real resin-coated carbon, but the high-gloss laminate gives it a glossy finish that reads convincingly from playing distance. The fine twill design has a smaller pattern that tends to look closer to genuine material on smaller areas.

Which size do I need for a pickguard only?

The 27.5×33 cm sheet covers most standard pickguards, while the 50×60 cm sheet is meant for a whole guitar or bass body. Some designs are in stock and most are printed to order, so check the listing for dispatch times.