• Spalted maple single cut kit black with Tru-Oil: kit laid flat with Tru-Oil sealer, Tru-Oil finish, sheen conditioner and free sanding set
  • Spalted maple single cut kit with black hardware and the Tru-Oil set, ready for a natural oil finish
  • Spalted Single Cut guitar body and ebony fretboard with 22 frets viewed from three-quarter angle
  • Unfinished mahogany Single Cut body and bolt-on neck showing rear and side profile details
  • Ebony fretboard with 22 frets and white pearl inlays displayed at angled overhead view
  • Unfinished mahogany bolt-on neck with headstock showing tuning peg holes from rear angle
  • Assembled Single Cut kit with black pickups and hardware installed on spalted body
  • Spalted Single Cut guitar front view showing ebony fretboard, pickups, and black volume knobs
  • Hardware and electronics components including pickups, tuners, bridge, and wiring harness
  • Headstock and upper fretboard close-up showing white pearl inlays on ebony fretboard
  • Complete Single Cut guitar angled three-quarter view with spalted body and assembled hardware
  • Full-length Single Cut guitar back view showing spalted mahogany body and fretboard alignment
1 13

The Guitar Fabrik

Spalted Maple Single Cut Guitar Kit, Black + Tru-Oil Set (Sanding Set Free)

Spalted Maple Single Cut Guitar Kit, Black + Tru-Oil Set (Sanding Set Free)

€314,95 EUR
€314,95 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.
Everything to build and oil-finish your own guitar: the Single Cut kit with spalted maple veneer, mahogany body, ebony fretboard and black hardware, plus the complete Tru-Oil set (sealer, finish and conditioner) and a free sanding set.
Share:
Need help? View full details

Build and finish your own guitar in one box: this bundle pairs our Single Cut Kit Spalted Maple Black with the complete Tru-Oil Full Set, and the sanding set is included free. Tru-Oil soaks into the spalted maple veneer and brings out its dark lines and figure for a warm, hand-rubbed natural finish.

In the box

  • Single Cut Spalted Maple Black kit: mahogany body with spalted maple veneer, bolt-on neck, ebony fretboard, black hardware, two humbuckers, solderless wiring
  • Tru-Oil Basecoat Sealer & Filler 90 ml
  • Tru-Oil Gun Stock Finish 240 ml (8 oz)
  • Stock Sheen & Conditioner 90 ml
  • Guitar sanding set P240 to P1500 – free

Finishing tips

  • Spalted maple has softer spots that drink oil: apply the Basecoat Sealer evenly before the first Tru-Oil coat.
  • Sand the veneer by hand and lightly only; never power-sand the top.
  • Leave the ebony fretboard unfinished.
  • Apply thin coats of Tru-Oil rubbed in, with light sanding between coats.

Step by step: Guitar Paint Guide – Tru-Oil Veneer Finish.