Nitrocellulose Spray, Copper Metallic: 400 mL guitar finishing lacquer
400 mL nitrocellulose lacquer spray for finishing your guitar kit in Copper Metallic. Achieve an easy, professional finish without a spray gun with Nitorlack formulated for guitars. Available in over 40 colours.
Volume: 400 mL | Type: Nitrocellulose lacquer spray | Colour: Copper Metallic | Application: No spray gun required | Formulation: Nitorlack for guitars
- Designed for finishing guitar kits
- More than 40 colour options available
- Enables an easy, professional-looking finish
- Developed specifically to paint guitars
Copper metallic nitrocellulose lacquer spray. This copper metallic guitar paint provides the desired colour layer and added protection after primer/sealer; copper metallic is also known as a warm reddish-brown finish.
Usage
This nitro lacquer copper colour is applied after the primer/sealer coat to provide the desired design and an additional protective layer. The copper lacquer guitar finish is also known as a rich reddish-brown tone, ideal for bodies and necks.
Compatibility
Compatible with our primer, varnish, grain filler and polish pastes. See the full nitrocellulose guitar finish range to complete your build.
Preparation & Application
- Shake vigorously for 2–5 minutes before use.
- Apply thin coats to avoid drips and achieve a homogeneous distribution.
- Spray in a low-humidity environment with a uniform movement from approximately 20 cm distance.
- Wait 12–24 hours between coats; lightly sand between coats if desired.
- Apply a primer and sand to 400 grit before spraying.
Safety
This product is toxic; use appropriate protection (goggles, mask, gloves) and apply outdoors or in a well-ventilated area.
