P90 Wiring Diagrams

Wiring diagrams for P90 pickups: one P90 with one volume and one tone, two P90s with a 3-way switch and one volume and one tone, or two P90s with two volumes and two tones. These are the layouts of our P90 kits.

One P90, 1 volume, 1 tone

One P90, 1 volume, 1 toneBridge pickup123Volume500K B123Tone500K ACapOutputjackTipSleeveBridge ground: bridge studShared ground: one connection, usually the back of the volume pot
  • Hot (signal)
  • Ground
  • Tone capacitor, typically 0.022–0.047 µF
Drawing
One P90, 1 volume, 1 tone
Pickups
1 P90
Switch
No switch
Controls
1 volume, 1 tone

Pots are shown from the back, with the lugs on top and numbered 1 to 3. Volume and tone are 500K, B for volume and A for tone. Wires in your guitar may not match the red and black used here, so follow what each wire does. The order of the lugs varies between switch makers, so check yours with a multimeter before soldering.

Left-handed guitar? The circuit is the same: only the positions of the parts change.

P90 wiring diagram with 500K volume and toneOpen the diagram as an image

Parts for this wiring

Need help?

No sound or a loud hum? See our wiring and electronics answers, or read how to wire a guitar. Spotted a mistake in this diagram? Please tell us. See all wiring diagrams.