Cool Designs for Guitars: How to Tell a Story Across the Whole Guitar
Share
Cool Designs for Guitars: How to Tell a Story Across the Whole Guitar
The coolest designs for guitars don't just decorate, they tell a story. A guitar has a front, a back and sides, and each one can hold a different part of the same tale: the front is what the crowd sees, the back is the surprise when you turn it over, and the sides tie the two together. Here are six ways to build a story across the whole guitar, the practical rules that make it work, and how our Mictlán design went from a first idea to a finished guitar.
Why a story makes a cool design
Most designs on a guitar are one picture on the front. It looks good on stage, and that's where it ends. When the whole guitar tells a story, every side has a reason to be looked at: people notice the front, ask about the back, and spot details on the sides they missed the first time.
Think of the guitar as a small book with three pages. The golden rule: the back never mirrors the front. It shows what happens next, what was there before, or what is hidden underneath.
6 ways to tell a story across a guitar
| Idea | Front | Sides | Back |
|---|---|---|---|
| A timeline | now, or the decisive moment | time passing: night to dawn, the seasons, the years | the past, how it all began |
| A journey | the start | the road itself, running round the guitar | the arrival |
| Above and below | what everyone sees | the cut between the two worlds | what is hidden underneath |
| A procession | the leader | the parade marching round | the place they reach |
| A creature | its head and claws | its body coiled round the guitar | its tail |
| Two viewpoints | the hero, seen from one side | the ground between them | what the hero is facing |
A seventh idea works with any of these: hidden details. Scatter a few small objects across all the pieces (seven skulls, a butterfly, a symbol) for people to find. Our Jisei set is built on a timeline, and the two Día de Muertos designs below use a procession and the above-and-below idea.
Tips that make a design work on a guitar
- Design it the way it's played. A guitar is seen sideways: on stage, on the wall, in photos. Compose most designs in landscape, with the neck to the right on the front. The back turns like a page, so there the neck is on the left.
- Know what the hardware covers. On the front, the neck, the pickups, the bridge and the control plate sit on top of the art. Keep faces and key details away from them. The back is the big free canvas: only the neck plate covers it.
- Keep the edges calm. Near the outline, use a continuous background (sky, water, paper, a pattern). No faces, hands or lettering close to the edge: the binding covers it.
- Cross at a landmark. When something travels from the front to the back (a path, a river, a tail), make it cross at a spot the eye can follow: the strap button at the tail, the jack, or the bass-side horn.
- One palette, one light. Use the same shades and the same light direction on every piece. If the light comes from the upper left on the front, it comes from the upper right on the back, because the guitar is turned over.
- Let the binding frame it. Dark art looks best with black binding, paper and ivory tones with cream binding.
- Finish the story on the small pieces. An engraved neck plate is the signature you find when you turn the guitar over, and a headstock decal names the story.
Example: how Mictlán went from idea to guitar
The idea. A design for the Day of the Dead: joyful remembrance, rich in detail, and nothing like the cartoon sugar skulls you see everywhere. We read about the old traditions behind the holiday: the Aztec codices, the marigold paths that guide the souls home, the xolo dog that walks with them, and the dancing skeletons of the printmaker José Guadalupe Posada.
Four stories, two concepts. From the same idea came four possible stories: a journey home, a skeleton procession, the world above and the world below, and a giant spirit creature wrapped round the guitar. Two were taken further as full concepts, and they could hardly be more different:
- Posada's Calaveras, a procession. Black ink on old cream paper, with marigold orange as the only accent. The front leads the parade, the sides march round the guitar and the back is the great dance where everyone arrives.
- Mictlán, the world above and the world below, painted like an Aztec codex in turquoise, red ochre and maize yellow.
The story of Mictlán. The front is the night of the dead on earth: marigolds, candles, the moon, and a soul in a feathered headdress setting off with its xolo dog. The side band is the descent through the levels of the underworld, running all the way round the guitar. The back is where the soul arrives: Mictlán, the land of the dead, where its lords wait on their throne. Read the guitar from front to back and you follow the soul's whole journey.
Proof, then print. Before anything is printed, the design is checked on a photo of a real guitar: the hardware areas, the edges under the binding, the joins between the pieces. Then the small pieces finish the story: an engraved neck plate with a xolo dog glyph and the headstock decal. In the end we liked both concepts too much to choose, so both became sets: Mictlán and Posada Calaveras.
Your own design, the same way
Our guitar artwork design service follows the same path as Mictlán:
- Your idea. Describe what you'd like, add up to 3 reference images, and pay a small deposit.
- 2 concepts. We send you two different designs, shown on a real guitar photo.
- Changes if you want them. Up to 2 rounds on the concept you choose.
- Print. You pay the balance, with your deposit deducted, and we print your front, back and side band.
Already have your images? Upload them for a custom full skin set, or as a custom skin sheet that fits any guitar. All the options are in make your own guitar skins, and the ready-made sets in our full body skins.
FAQ
What makes a design on a guitar look cool?
A clear idea that carries across the whole guitar, one palette, and strong contrast with the binding. A design that tells a story keeps people looking, because the back and the sides show something new.
Can a design cover the back and the sides too?
Yes. On a TL-style bound body we print a front skin, a back skin and a 1500 × 50 mm side band, so one story runs all the way round.
Can you create a design from my idea?
Yes. Describe your idea, add a few reference images if you have them, and we send you 2 concepts. You then have up to 2 rounds of changes if you want anything changed.
Do I have to ask for changes?
No. The 2 rounds of changes are there if you want them. If you love a concept as it is, we go straight to the proof.
My guitar isn't a TL-style body. Can I still have a design?
Yes. We can deliver your design as a 50 × 60 cm sheet that you trim to any body shape.