Finishing Tip
For the deepest gloss nitro top coat, build multiple thin coats rather than one heavy coat, letting each layer of clear gloss nitrocellulose spray cure fully before light sanding and re-coating.
Varnish Clear Gloss Nitro Spray, 400mL, nitrocellulose topcoat for guitars
Nitrocellulose clear gloss spray lacquer for the last coat on DIY guitar kits. Provides a transparent gloss that highlights prior coats or natural wood grain while offering hardness, elasticity, and high transparency.
Type: Nitrocellulose clear gloss spray lacquer | Volume: 400 mL | Intended use: Final protective coat on DIY guitar kits
- Transparent gloss highlights coats or natural wood grain
- Adds depth and brightness to electric guitar finishes
- Excellent hardness and elasticity for surface protection
Clear gloss nitrocellulose spray for durable, high-shine final top coats in guitar finishing. This nitro clear coat guitar lacquer seals and protects your instrument while delivering a deep, glassy gloss.
Usage
This clear gloss guitar lacquer is applied as the final protective top coats in the finishing process, building a hard, transparent shell over colour or stained surfaces.
Compatibility
Compatible with the brand’s nitrocellulose guitar finish products, grain filler, and polish pastes.
Preparation & Application
- Shake the can vigorously for 2–5 minutes before use.
- Spray thin, even coats to avoid drips and achieve homogeneous coverage.
- Apply in a low-humidity environment with a uniform motion at approximately 20 cm distance from the surface.
- Allow 12–24 hours between coats; ideally sand slightly between coats.
Safety
Nitrocellulose is toxic; use appropriate protection (goggles, mask, gloves) and apply outdoors or in a well-ventilated area.
Specifications
| Volume | 400 mL |
