Strat pickguard, your artwork, copper-shielded back
Any design from our skin library printed and fitted on an 11-hole Strat pickguard in our own workshop, then shielded with copper tape, the quiet three single coils need.
Shape: Strat, 11-hole | Layout: SSS | Front: printed laminated vinyl | Back: copper-tape shielding | Screws: chrome, black or gold | Made in: our workshop
- Choose from our guitar skin designs, or upload your own
- Copper shielding fitted as standard
- Cut and trimmed around every pickup opening, control and screw hole
- Dispatched in about 4 days, ~15 days in transit
A Strat pickguard, finished in our workshop with the artwork you choose and shielded with copper tape on the back. Screw it on and the guitar looks like a one-off build: no spraying, no masking, and no skin to stretch over the curves and contours of the body.
Pick any design from our library of guitar skins, or send us your own image and we print that instead. The artwork is laid on the front, wrapped at the edges and trimmed around the three pickup openings, the controls and every screw hole, so it fits like a plain pickguard.
On a Strat, the shielding earns its place. Three single-coil pickups are the layout most prone to hum from lights, screens and power supplies. Copper shielding on the back of the pickguard is the classic cure, the job that usually costs an afternoon with a roll of tape and a soldering iron. Here it comes fitted as standard.
Standard 11-hole Strat drilling with an SSS layout. The screws come in chrome, black or gold, so they match the rest of your hardware.
Matching tremolo cover (option, +£12). Add the cover that goes on the back of the guitar, over the tremolo springs, printed with the same design and fitted in the same way. You choose which part of the design goes on it, the same part as the pickguard or another one, and the preview shows the back of the guitar with it.
