WORKING ENVIRONMENT

To get a clean and professional finish on your guitar, it's essential to prepare your workspace and tools properly before starting. Here’s how to set up your painting environment.

Choose a stable indoor space:

• Work indoors in a clean, dust-free and well-ventilated room.
• Avoid outdoor areas to prevent contamination from wind, insects or humidity.
• Let the guitar wood rest in this space for 48 hours before finishing to adjust to temperature and humidity.

Prepare how you'll hold the parts:

• Hang the body and neck using screws or hooks through strap button or tuner holes.
• For spraying, fix a stick into the neck pocket to hold the body safely while working.
• For sanding and manual staining, lay parts flat on padded surfaces like foam or cushions.

You can also fix the body to a piece of wood. This allows you to hold it in your hand when finishing with a spray or to put it in a clamp :

Plan your workflow:

• Decide where each step will take place: staining, spraying, drying, etc.
• Allow enough space for parts to dry between coats, without touching anything.
• Expect the full finishing process to take from one to four weeks depending on the products used.

Check your materials:

• Make sure you have all the tools and products listed in your finishing kit.
• Read through all steps and instructions before starting to avoid surprises mid-process.